Pulsar 510 DL Wizard Pipe
















The Pulsar 510 DL Wizard Pipe features interchangeable Wizard and Sherlock stems in a pipe-shaped housing. It fits most standard 0.5g to 2g cartridges and includes a 650mAh rechargeable battery, adjustable voltage, a colour display, and USB-C charging.
Product Specifications
| Manufacturer: | Pulsar |
|---|---|
| User Level: | Beginner |
| Material Compatibility: | 510 Cartridges |
| Heating System: | Single 510 Thread |
| Heat Up Time: | Quick (10–30 sec) |
| Charge Time: | Fast (under 1 hr) |
| Charging Port: | USB-C |
| Wireless Charging: | No |
| Pass Through Charging: | No |
| Bubbler Compatibility: | No |
| Display: | Yes |
| Warranty Period: | 6 Months Limited |
|---|---|
| Battery Size: | Over 650mAh |
| Temperature Range: | 2.8V, 3.4V, 3.8V |
| Temperature Control: | Preset |
| Smartphone Compatibility: | No |
| Vibration Alert: | Yes |
| Motion Sensor: | No |
| Swappable Battery: | No |
| Device Size: | Medium |
| Ease of Cleaning: | Easy |
Contents
Buy Pulsar 510 DL Wizard Pipe
The Pulsar 510 DL Wizard Pipe is a 510 thread battery from Pulsar that takes a different path from the usual vape pen. Instead of a plain pen or bar shape, it is styled like a classic pipe.
Key Features of the Pulsar 510 DL Wizard Pipe
- Wizard-Inspired Pipe Design: A classic churchwarden shape with a wood-grain pattern throughout the body.
- Interchangeable Stems: Includes a long Wizard stem and a shorter Sherlock stem.
- Hidden Cartridge Chamber: Fully encloses the cartridge inside the pipe.
- 510 Cartridge Compatibility: Fits most standard 0.5g to 2g cartridges, up to 14mm in diameter and 62mm in length, with resistance of at least 0.8 ohms.
- Auto-Draw & Manual Mode: Inhale to activate, or hold the button for manual control.
- Adjustable Voltage: 1.8V to 4.2V in 0.1V steps.
- 8-Second Preheat: A low-voltage warmup at 1.8V to help with clogs.
- Full-Color Display: Shows battery life, voltage, and your puff count.
- 650mAh Battery: Rechargeable internal battery.
- USB-C Charging: Charges to full in just over an hour.
Wizard-Inspired Pipe Design
The Wizard Pipe looks like a classic churchwarden pipe, with a faux wood-grain pattern all around the body. The battery sits hidden inside a rounded base, and the long pipe section hides the cartridge.
Interchangeable Stems
The pipe comes with two stems, so you can pick the look you like. The long Wizard stem gives the full churchwarden style. The shorter Sherlock stem gives a more compact pipe. Each stem is a cover that twists on and off the battery, and your cartridge sits inside it.
Hidden Cartridge Chamber and Compatibility
The cartridge of this 510 thread battery sits completely inside the pipe, so it stays out of sight. The Wizard Pipe is compatible with most 0.5g to 2g 510-threaded cartridges, with a maximum cartridge size of 14mm in diameter and 62mm in length (0.55 x 2.4 inches). The cartridge resistance must be 0.8 ohms or higher. If you remove the stem, the pipe base can work with larger cartridges, but you press the screen to fire it. Cartridges are not included.
Auto-Draw and Manual Mode
The vape pen also has an auto-draw that works only when a stem is attached. Once your voltage is set, you simply inhale from the mouthpiece and the device fires. There is no need to press a button. If you prefer more control, use manual mode by holding the button while you inhale.
After 10 seconds without use, the device goes into standby mode. Press the button once to wake it, or pull on the mouthpiece to get it ready again.
Adjustable Voltage
You can also set the voltage anywhere from 1.8V to 4.2V in 0.1V steps. Press the button 3 times to enter voltage adjustment mode. Once the voltage display starts blinking, press the button once for each 0.1V step, or long-press to cycle through the range. When the display stops blinking, your setting is saved. Lower settings give a smoother draw, while higher settings give a stronger one.
8-Second Preheat
Press the button twice to start the preheat. It runs at 1.8V for 8 seconds, and a flame icon lights up and blinks during the cycle. This low-voltage warmup is designed to prime the cartridge and help with airflow clogs.
Full-Color Display and Puff Counter
The button doubles as a full-color digital screen. Colored rings show your battery life, your voltage level, and whether the pipe is heating. A puff counter sits below the rings, and it shows your total puffs each time you wake the device. To reset it to 0000, press the button 3 times quickly and hold on the third press. The counter does not work without the stem attached.
650mAh Battery and USB-C Charging
The Wizard Pipe has a 650mAh internal battery with USB-C charging. It charges to full in just over an hour. When the battery reaches 100%, the bolt stops flashing and you can unplug it.
Size and Portability
The 510 DL Wizard Pipe by Pulsar measures approximately 28cm long with the Wizard stem attached, or 13cm long with the Sherlock stem attached. The battery sits in the rounded base, and the cartridge sits in the pipe section above it. Because each stem twists off the battery, you can take the pipe apart when you need to. This makes loading and cleaning easier.
Built-In Protection and Alerts
The Wizard Pipe has a few simple alerts so you know what is happening. If the cartridge resistance drops below 0.8 ohms, the red light flashes 3 times, the device goes into standby, and the output shuts off. When the battery runs out, the light ring flashes red 10 times, and the device stays in standby until you recharge it.
How to Use the Pulsar 510 DL Wizard Pipe
- Charge the device fully with a USB-C cable and a standard charging brick.
- With the mouthpiece facing you, twist the stem cover counterclockwise and pull it off.
- Screw your 510-threaded cartridge in firmly.
- Put the stem cover back on and twist it clockwise to secure it.
- Press the button 5 times quickly to turn the device on.
- Press the button 3 times, then press once per 0.1V step, or long-press, to set your voltage. Wait for the display to stop blinking to save it.
- To preheat, press the button twice. The 8-second cycle runs at 1.8V.
- Inhale from the mouthpiece to use auto-draw, or hold the button while you inhale for manual mode.
- To turn the device off, press the button 5 times quickly.
To reset the puff counter, press the button 3 times quickly and hold on the third press.
How to Clean the Pulsar 510 DL Wizard Pipe
- Twist off the stem cover and remove it from the battery.
- Use ISO cleaning sticks or wipes to clear residue from the 510 connection.
- Clean the air pathway with an ISO cleaning stick. Move in a circular motion, up and down, until no oil remains.
- Do not put any part in cleaning liquid. Let everything air dry before you put it back together.
Who Is the Pulsar 510 DL Wizard Pipe For?
- Style-minded users who want a battery that looks like a classic pipe.
- Users who like options and want a long or short stem.
- People who want control and like to set voltage in 0.1V steps.
- Dosing-conscious users who want to track their puff count on the screen.
- Everyday users who want auto-draw with a manual mode as backup.
Shop the Pulsar 510 DL Wizard Pipe Today
The Wizard Pipe gives you a classic pipe look, fine voltage control, and easy auto-draw use. Buy the Pulsar 510 DL Wizard Pipe from Tools420 today and upgrade your daily sessions.
What's in the box
1 x Pulsar 510 DL Wizard Pipe
1 x Sherlock-length stem
1 x Wizard-length stem
1 x USB-C charging cable
Pulsar 510 DL Wizard Pipe
Product Q&A
There are no questions yet.
























Reviews
There are no reviews yet