Crossing One Hit Wonder V2

Buy Crossing Wireless One Hit Wonder V2 Ball Vape

The Crossing Wireless One Hit Wonder V2, or WOHW V2, is a powerful desktop ball vape built for dense, flavorful hits without a cable attached to the heater during use.

If you are new to ball vapes, the concept is simple. The heater contains 280 × 3 mm ruby balls that store heat. You warm the heater inside the docking station, lift it out by the wooden handle, place it on the bowl, and inhale. Air passes through the hot rubies and quickly heats your dry herb.

The WOHW V2 includes four main parts:

• Wireless Heater Wand: Stores heat in the ruby-filled chamber.
• Heating Dock: Heats the wand and holds it safely between uses.
• PID Controller: Lets you precisely set the heating temperature.
• Titanium Matrix Bowl: Holds your dry herb and connects to your glass piece.

The system is still a desktop vaporizer. The PID controller and dock stay plugged into the wall, but the heater itself is cordless when you use it.

Key Features

Wireless Ball Vape Design

The main advantage of the WOHW V2 is freedom of movement.

The heater warms inside the dock, then comes out completely free of cables for your draw. This makes it easier to position over your glass piece and keeps hot cords away from your setup.

After use, return the heater to the dock so it can regain heat.

280 Ruby Ball Heating Core

The heater contains 280 ruby balls of 3 mm size that absorb and retain a large amount of heat.

As you inhale, cool air passes through the hot rubies and becomes a powerful stream of heated air before reaching your dry herb.

This gives the WOHW V2:

• Fast extraction
• Dense vapor
• Strong heat retention
• Good flavour
• Excellent one-hit performance

Built for One-Hit Extraction

The WOHW V2 is designed to deliver a large amount of stored heat in a single draw.

It works especially well for users who want:

• Dense vapor
• Fast extraction
• Larger hits
• Strong airflow
• Powerful single-draw sessions

Because the heater is no longer actively powered after leaving the dock, it gradually loses heat. For the most consistent second draw, return it to the docking station first.

Injector & Diffuser Modes

The WOHW V2 can be used in two ways with the Matrix Bowl.

Injector Mode: The narrow end sits inside the bowl and focuses on strong convection heating and clean flavour.

Diffuser Mode: The wider end fits over the bowl, bringing the ruby heater closer to the material and adding more conductive heat for denser extraction.

Beginners can start with injector mode and experiment with diffuser mode later.

Precise PID Temperature Control

The included PID controller gives you precise control over the heating coil.

A good starting point is around 535°F / 280°C.

Simple Temperature Guide

• Lower settings: Lighter, more flavour-focused vapor
• Around 535°F / 280°C: Good beginner starting point
• Higher settings: Denser vapor and faster extraction
• Around 600°F / 315°C: Stronger performance for experienced users

Your ideal temperature will depend on draw speed, load size, glass setup, heater mode, and heat-soak time.

Important: The PID shows the heating-coil temperature, not the actual temperature of your material.

Heat Soak for Better Performance

Heat soak is important with a wireless ball vape.

After the PID reaches temperature, allow the heater around 5 additional minutes to fully absorb heat when starting from cold.

Between draws, return it to the dock so it can recover.

You can also preheat the empty Titanium Matrix Bowl before loading it if you want stronger hybrid heating, but beginners can skip this step initially.

Titanium Matrix Bowl

The included Titanium Matrix Bowl supports both 14.4 mm and 18.8 mm glass joints, making it compatible with most common glass rigs and bubblers.

Its adjustable screen lets you change bowl depth and load size.

The bowl works well for larger sessions but does not need to be completely filled.

Stainless Steel or Titanium Heater

The WOHW V2 is available with either a stainless steel or titanium heater housing.

Stainless Steel

• Better heat retention
• Heavier
• Well suited to dense, powerful hits

Titanium

• Lighter
• Faster thermal response
• Good choice for users who prioritize responsiveness and flavour

25 mm XL Heating Coil & Dock

The WOHW V2 uses a large 25 mm XL barrel heating coil inside its aluminum docking station.

The dock heats the removable heater and provides a secure place to return it after each draw.

What Else Do You Need?

The WOHW V2 includes the heater, PID controller, heating coil, docking station, Matrix Bowl, joints, and main accessories.

You will still need a compatible glass water pipe, bong, or bubbler.

A good option is the 14mm Mega Globe Whip Bubbler. Its wide base makes it especially well suited to a desktop ball vape setup.

Your basic setup is:

PID Controller → Heating Dock → Wireless Heater

During use:

Wireless Heater → Matrix Bowl → Glass Bubbler

How to Use the Crossing WOHW V2

1. Complete the Initial Burn-Off

Before first use, place the heater in the dock and run the system at 800°F / 427°C for approximately 10 minutes with no material loaded.

Afterward, lower it to your normal temperature.

2. Set the Temperature

Start around 535°F / 280°C.

Allow the PID to reach temperature.

3. Let It Heat Soak

When starting from cold, give the heater about 5 extra minutes to fully store heat.

4. Grind and Load

Use a medium grind and loosely fill the Titanium Matrix Bowl.

Avoid packing the material tightly because good airflow is essential.

5. Place the Bowl on Your Glass

Attach the Matrix Bowl to your glass piece and make sure everything is sitting securely.

6. Remove the Heater

Use only the wooden handle to lift the heater from the dock.

Never touch the hot metal housing.

7. Choose Injector or Diffuser Mode

Use the narrow end for injector mode or flip the heater and use the wider end for diffuser mode.

8. Take a Smooth Draw

Inhale smoothly through your glass piece.

If the vapor feels too light, gradually adjust temperature, heat-soak time, or draw speed.

9. Return the Heater to the Dock

After your draw, place the heater back into the docking station so it can recover its heat. Allow approximately 30 to 60 seconds for the heater to reheat between draws, depending on the temperature setting and heat loss.

Never place the hot heater directly on a table or countertop.

Beginner Tips

If this is your first wireless ball vape:

• Start around 535°F / 280°C
• Allow a full heat soak
• Keep the bowl loosely packed
• Use smooth draws
• Start with injector mode
• Return the heater to the dock after every draw
• Change only one setting at a time
• Always use the wooden handle

Once you find the right temperature, draw speed, and heat-soak time, the WOHW V2 becomes much easier to use consistently.

Comparing Crossing One Hit Wonder V2 vs Ruby Twist Pro

The biggest difference is how the heater receives power.

Crossing One Hit Wonder V2 (WOHW V2)

The heater warms in a docking station and is completely cordless during use.

Best for:

• Wireless handling
• Powerful one-hit extraction
• Injector and diffuser modes
• Cleaner setup around your glass piece

The trade-off is that the heater gradually loses heat after leaving the dock.

Ruby Twist Pro

The Ruby Twist Pro remains connected to its heating coil while you use it.

Best for:

• Longer sessions
• Multiple consecutive draws
• More consistent heat
• Back-to-back use

If you want wireless handling and strong one-hit performance, choose the WOHW V2.

If you want continuous heating and longer multi-hit sessions, the Ruby Twist Pro may be the better option.

Safety

The WOHW V2 operates at extremely high temperatures.

Always:

• Hold the heater only by the wooden handle
• Return it to the dock after use
• Never touch the hot heater housing or coil
• Keep the setup on a stable surface
• Keep hot components away from your face and body
• Keep the powered system away from water
• Keep it away from children and pets
• Never leave the powered heater unattended
• Allow everything to cool before cleaning or storage

How to Clean the Crossing WOHW V2

Always switch off the PID, unplug it, and allow everything to cool completely before cleaning.

For regular maintenance:

1. Empty the bowl: Remove used material and use a cleaning brush to remove loose herb, dust, and debris from the Matrix Bowl and screens.
2. Deep clean removable parts: Remove any compatible metal parts and soak them in isopropyl alcohol for 15–20 minutes to help loosen built-up residue.
3. Clean stubborn buildup: Use an ISO cleaning stick or cotton swab dipped in isopropyl alcohol to scrub away stubborn gunk from hard-to-reach areas.
4. Clean the glass: For the 14mm Mega Globe Whip Bubbler or other removable glass pieces, use isopropyl alcohol or Orange Chronic to break down heavier residue and buildup. Rinse thoroughly afterward.
5. Inspect and dry: Inspect the screens, Viton O-rings, glass joints, and Matrix Bowl components for buildup, damage, or wear, and replace parts when needed. Allow all cleaned components to dry completely before reassembly.
6. Reassemble: Reassemble the WOHW V2 only after all cleaned components are completely dry.

Important: Never submerge the PID controller, power cable, heating coil, docking station, or complete heater assembly in water, isopropyl alcohol, or another cleaning liquid.

Who Is the WOHW V2 Best For?

The Crossing Wireless One Hit Wonder V2 is best for users who want powerful ball vape performance without a cable attached to the heater during the actual draw.

It is especially well suited to people who want:

• Wireless heater handling
• Dense vapor
• Strong one-hit extraction
• Precise PID control
• Injector and diffuser modes
• 14.4 mm and 18.8 mm glass compatibility
• Stainless steel or titanium heater options
• A complete desktop ball vape system with room to experiment

It does have more of a learning curve than a desktop vaporizer, but beginners can keep things simple by starting around 535°F / 280°C, using injector mode, allowing a full heat soak, and returning the heater to the dock after each draw.

Buy the Crossing Wireless One Hit Wonder V2

The Crossing Wireless One Hit Wonder V2 combines a high-thermal-mass ruby heater, cordless wand design, precise PID control, Titanium Matrix Bowl, and both injector and diffuser modes in one powerful desktop setup.

Shop the Crossing Wireless One Hit Wonder V2 at Tools420 for strong wireless ball vape performance, flexible heating options, and precise temperature control, plus free shipping on orders over $80.

What's in the box

• 1 x Stainless Steel (SS316) wireless housing filled with 280 × 3mm ruby balls
• 1 x Preassembled 21.5mm diffuser adapter for use with the included Matrix Bowl
• 1 x 22.15mm diffuser adapter ring for use with 22mm diffuser bowls from other manufacturers
• 1 x Titanium Matrix Bowl with both 14.4mm and 18.8mm glass joints
• 1 x Classic PID Controller
• 1 x Dock Station with screws and Allen key
• 1 x 25mm XL Barrel Heating Coil
• 1 x SQP Scoop and Tamper
• 1 x Wooden Handle Brush
• 1 x Power Cord
• 2 x Flat Mesh Screens for the Titanium Matrix Bowl
• 1 x Adjustable-Height Mesh Basket-Style Screen for the Titanium Matrix Bowl
• 2 x Viton O-Rings for the Titanium Matrix Bowl